Those very kind people at Unitronics have been recording the
webinars and have now made them available via their support website.
So if you want to learn more about the feature rich products
and the FREE programming and utility software take a look.
All you need is a PC with Web access and speakers and maybe a cup of coffee.
| Buttons and Lights – Learn how to work with the HMI and Ladder in
VisiLogic. We will use contacts and coils as inputs and outputs for out
ladder. We will link the ladder to HMI elements and see how to affect
the Ladder from the HMI. We will also learn about some of the HMI tools
and functions. Downloading to the controller will also be covered. This
is a great first step for any new user. |
- Types and uses for timers in Vision controllers.
- How to add HMI displays in the project and jump between them.
The webinar takes a little more than one hour and is divided into 5 parts for easy access and learning.
Download the VisiLogic project (*.vlp file) which was created during the session!
|
- Vectors
- Vector tools
- Vector Search
- Indirect Addressing
|
This webinar covers the basics of implementing analog I/O with Unitronics controllers.
- Types of Transducers
- Linearization
- Trends
- Meters
|
This webinar will cover the basics of utilizing SD cards with Unitronics controllers:
1. SD Tools
2. SD Example Project
- Log Line (.ulg)
- Full DT (.udt)
- DT Append (.udt)
- Excel to SD (.csv)
- Copy SD to DT (read tags)
|
Part 1 - We will explore how to set up a data table in VisiLogic and use
it to log data. We will show how to create a data table, and how to
link each column to a register type. We will then use the ladder
section to create a time/event driven routine to log data.
|
|
Part 2 - We will learn how to use DataXport to pull the data table from
the PLC and save it to the PC as an excel file. We will learn how to set
up a time based automatic download, and an even based download over
TCP/IP. |
This webinar will cover the basics of utilizing SD cards with Unitronics controllers:
1. SD Tools
2. SD Example Project
- Log Line (.ulg)
- Full DT (.udt)
- DT Append (.udt)
- Excel to SD (.csv)
- Copy SD to DT (read tags)
|
You can implement motor control by controlling the high-speed outputs of
certain Vision controllers using PTO functions, controlling up to three
independent axis. In this way you can, for example, build speed
profiles that are appropriate for stepper motors. Note that the PTO
control functions are open-loop, and do not rely on positional feedback.
|
This webinar will cover the basics of implementing Modbus RTU with Unitronics controllers.
Split into three convenient videos, with example programs included, as well as Q&A session.
|
Ethernet – Learn the basics of setting up an Ethernet connection to
communicate to and program the controller. Learn about the setup and
configuration of the card, and the sockets. Learn how to use the remote
management tool “Remote Operator” to bring up the screen of the PLC on
the PC over the network. Take a quick look at Modbus IP and see how to
communicate between two controllers.
|
- CANbus networking
- PLC to PLC communication
- PLC to EX-RC1 communication (Remote Expansion I/O)
- Bridging RS-232 and CANbus networks
|
| |
| |